ACCO Brands T300 Manuel d'utilisateur télécharger pdf (Page 12)

ILLUSTRATED PARTS MANUALS

T300 THERMAL BINDER

220-240V

T300.doc 12

SECTION 3.0

Replacement of PCB

1. Carry out procedures 1 to 7 section 1.

2. Replace the PCB

3. Reassemble machine In reverse sequence.

SECTION 4.0

Replacement of document support bar/spring/lever arm

1. Carry out procedures 1 to 4 section 1.

2. To remove extension spring unhook from rear screw boss and lever arm.

3. Replace spring.

4. To remove lever arm carry out procedures 1 to 4 section 1, and then 9 to 11 section 1.

5. To remove document support bar, carry out procedures 1 to 5 section 1.0 and procedures 9 to 14 in

section 1.0.

6. Replace document support bar.

7. Reassemble machine by reversing above operations.

SECTION 4.1

Replacement of Buttons

1. Carry out procedures 1 to 8 section 1.0.

2. Replace the buttons, making sure that the grey button is in the aperture marked 1, the red button is In

the aperture marked 0, the yellow button is in the aperture marked ? and the green button in the

aperture marked

3. Reverse procedure 1 to reassemble machine.

SECTION 4.2

Issue No 1

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

Pas de commentaire

ACCO Brands T300 Manuel d'utilisateur Page 12